| |
 |
EB72F51 Series Test Circuits
|
 |
|
|
- Note 1: An external 0.1µF low frequency tantalum bypass capacitor
in parallel with a 0.01µF high frequency ceramic bypass capacitor close to
the package ground and pin is required.
- Note 2: A low input capacitance (<12pF), 10X Attentuation Factor, High
Impedance (>10Mohms), and High bandwidth (>300MHz) passive probe is recommended.
- Note 3: Capacitance value includes sum of all probe and fixture capacitance.
See applicable specification sheet for ‘Load Drive Capability’.
|
|
 |
|
| Top of Page |
|
|
|
- Note 1: An external 0.1µF low frequency tantalum bypass capacitor
in parallel with a 0.01µF high frequency ceramic bypass capacitor close to
the package ground and pin is required.
- Note 2: A low input capacitance (<12pF), 10X Attentuation Factor, High
Impedance (>10Mohms), and High bandwidth (>300MHz) passive probe is recommended.
- Note 3: Capacitance value includes sum of all probe and fixture capacitance.
See applicable specification sheet for ‘Load Drive Capability’.
|
|
|
|
| Top of Page |
|
Test Circuit with Voltage Control Option