| |
 |
ES52C5 Series TCXO |
Stock Search
Quote/Sample
|
- Temperature Compensated Crystal Oscillators (TCXO)
- Clipped Sinewave Output
- +3.0V Supply Voltage
- External Voltage Control Option
- 4 Pad Ceramic SMD Package
- RoHS Compliant (Pb-Free)
|
 |
 |
|
|
 |
Nominal Frequency |
10.000MHz, 12.000MHz, 12.288MHz, 12.800MHz, 13.000MHz, 14.400MHz, 14.487MHz, 14.7456MHz, 16.000MHz, 16.367667MHz,
16.369MHz, 16.384MHz, 16.385228MHz, 16.800MHz, 18.414MHz, 19.200MHz, 19.440MHz, 20.000MHz,
23.104MHz, 24.000MHz, 24.553MHz, 24.5535MHz, 24.576MHz, 25.000MHz, 26.000MHz, 27.000MHz
30.000MHz or 40.000MHz |
|
The specified reference or "center" frequency of the oscillator.
Typically specified in megahertz (MHz)or kilohertz (kHz).
|
|
| Frequency Stability |
| vs. Operating Temperature Range: |
per Operating Temperature Ranges vs. Frequency Stabilities table below |
|
| vs. Frequency Tolerance: |
±1.0ppm Maximum
(Measured at 25°C ±2°C, at VDD=3VDC and VC=1.5VDC)
|
|
| vs. Aging (at 25°C): |
±1.0ppm/year Maximum |
|
| vs. Input Voltage (±5%): |
±0.3ppm Maximum |
|
| vs. Load (±1k Ohms // ±1pF): |
±0.2ppm Maximum |
|
|
Operating Temperature Range |
per Operating Temperature Ranges vs. Frequency Stabilities table below |
|
The maximum and minimum temperatures that
the oscillator device can be exposed to during oscillation. Over this
temperature range, all of the specified device operating
parameters are guaranteed.
|
|
Supply Voltage (VDD) |
3.0VDC ±5% |
|
The DC input voltage necessary for oscillator operation, specified in
volts.
|
|
Input Current |
2.0mA Maximum |
|
The amount of current consumption by an oscillator from the power
supply, typically specified in milliamps (mA).
|
|
| Output Voltage (Vp-p) |
.7Vp-p Clipped Sinewave Minimum, External DC-Cut capacitor required, 1000pF recommended |
|
Load Drive Capability |
10kOhms // 10pF |
|
The maximum load the oscillator can drive specified in terms of the
number of gates or the type of load circuit (Figures 2, 3 and 4 in oscillator glossary of terms).
|
|
Storage Temperature |
-40°C to +85°C |
|
The minimum and maximum temperatures that the device can
be stored or exposed to when in a non-oscillation state. After exposing or
storing the device at the minimum or maximum temperatures for a length of
time, all of the operating specifications are guaranteed over the specified
Operating Temperature Range.
|
|
| Frequency Deviation (Optional) |
±8ppm Minimum over control voltage of 1.5VDC ±1.0VDC; Positive Transfer Characteristic |
|
| Start Up Time |
5mSec Maximum |
|
| Phase Noise |
Typical Values
-80dBc/Hz at 10Hz Offset
-115dBc/Hz at 100Hz Offset
-135dBc/Hz at 1kHz Offset
-148dBc/Hz at 10kHz Offset
|
|
|
Note: Measurements made at VDD=3VDC and VC=1.5VDC.
|
| Operating Temperature Range |
Frequency Stability
X = Availability For All Frequencies
Y = Availability from 10.000MHz to 30.000MHz
Z = Availability from 10.000MHz to 27.000MHz
|
|
| ±1.0ppm |
±1.5ppm |
±2.0ppm |
±2.5ppm |
±3.0ppm |
|
| 0°C to +50°C |
X |
X |
X |
X |
X |
|
| -10°C to +60°C |
X |
X |
X |
X |
X |
|
| -20°C to +70°C |
X |
X |
X |
X |
X |
|
| -30°C to +60°C |
X |
X |
X |
X |
X |
|
| -30°C to +75°C |
X |
X |
X |
X |
X |
|
| -30°C to +85°C |
X |
X |
X |
X |
X |
|
| -40°C to +85°C |
|
Z |
Z |
Y |
X |
|
|
|
 |
|
| Top of Page |
|
|
|
| Pin 1: Voltage Control or No Connect |
Pin 3: Output |
| Pin 2: Case Ground |
Pin 4: Supply Voltage |
|
|
|
|
| Top of Page |
|
|
|
| Please note that this form is intended to provide a listing
of standard options. If you require an option or configuration
that is not present here, you may want to fill out our
Custom Oscillator Part Number Request Form. If you have any trouble with
this form, or just have a suggestion as to how it might be improved, please
contact our Global Customer Support Team. |
|
|
|
|
|
| Top of Page |
|
|
|
|
|
|
| Top of Page |
|
|
|
|
| Line 1: |
EXX.XXX
- E = Ecliptek
- XX.XXX = Frequency (5 Digits Maximum + Decimal)
|
|
| Line 2: |
XXYZZ
- XX = Ecliptek Manufacturing Code
- Y = Last Digit of Year
- ZZ = Week of Year
|
|
|
|
|
|
| Top of Page |
|
|
|
|
| ESD Susceptibility: |
MIL-STD-883, Method 3015, Class 2, HBM: 1500V |
|
| Fine Leak Test: |
MIL-STD-883, Method 1014, Condition A |
|
| Flammability: |
UL94-V0 |
|
| Gross Leak Test: |
MIL-STD-883, Method 1014, Condition C |
|
| Mechanical Shock: |
MIL-STD-883, Method 2002, Condition B |
|
| Moisture Resistance: |
MIL-STD-883, Method 1004 |
|
| Moisture Sensitivity: |
J-STD-020, MSL 1 |
|
| Resistance to Soldering Heat: |
MIL-STD-202, Method 210, Condition K |
|
| Resistance to Solvents: |
MIL-STD-202, Method 215 |
|
| Solderability: |
MIL-STD-883, Method 2003 |
|
| Temperature Cycling: |
MIL-STD-883, Method 1010, Condition B |
|
| Vibration: |
MIL-STD-883, Method 2007, Condition A |
|
|
|
|
|
| Top of Page |
|
|
|
|
|
|
| Top of Page |
|
Operating Temperature Ranges vs. Frequency Stabilities
Mechanical Dimensions
Part Number Constructor / Request a Quote or Sample
Marking Specifications
Environmental & Mechanical Specifications
Other Resources