Log On  |  714-433-1200  |  Email Customer Support

EB13C5 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)

Revision  D  03/12/2015

Electrical Specifications

Nominal Frequency 6.144MHz to 40.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Operating Temperature Range 0°C to +70°C
-40°C to +85°C
Supply Voltage 3.3VDC ±10%
Input Current 2mA Maximum over Nominal Frequency of 6.144MHz to 9.999999MHz
3mA Maximum over Nominal Frequency of 10MHz to 19.999999MHz
5mA Maximum over Nominal Frequency of 20MHz to 36MHz
6mA Maximum over Nominal Frequency of 36.000001MHz to 40MHz
Output Voltage Logic High (VOH) IOH= -4mA
90% of VDD Minimum
Output Voltage Logic Low (VOL) IOL= +4mA
10% of VDD Maximum
Duty Cycle Measured at 50% of Waveform
50 ±10(%)
50 ±5(%)
Rise Time/Fall Time Measured at 20% to 80% of Waveform
6nSec Maximum over Nominal Frequency of 6.144MHz to 25MHz
4nSec Maximum over Nominal Frequency of 25.000001MHz to 40MHz
Load Drive Capability 15pF Maximum
Output Logic Type CMOS
Logic Control / Additional Output Tri-State
Tri-State Input Voltage (VIH and VIL) 90% of VDD Minimum or No Connect to Enable Output, 10% of VDD Maximum to Disable Output (High Impedance)
Standby Current Disabled Output: High Impedance
10µA Maximum
RMS Phase Jitter Fj = 12kHz to 20MHz
1pSec Maximum
Period Jitter (Deterministic) 0.2pSec Typical, 3pSec Maximum
Period Jitter (Random) 2pSec Typical, 5pSec Maximum
Period Jitter (RMS) 3pSec Typical, 7pSec Maximum
Period Jitter (pk-pk) 40pSec Typical, 100pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55°C to +125°C