EB15E2 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 2.5Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)
Revision O 12/05/2014
Electrical Specifications
| Nominal Frequency |
1.024MHz to 66.6666MHz
Some frequencies within this range may not be available. |
| Frequency Tolerance/Stability |
(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
|
| Operating Temperature Range |
-20°C to +70°C
-40°C to +85°C
|
| Supply Voltage (VDD) |
2.5VDC ±5% |
| Input Current |
Click to Open Input Current Table |
| Output Voltage Logic High (VOH) |
IOH= -4mA
90% of VDD Minimum |
| Output Voltage Logic Low (VOL) |
IOL= +4mA
10% of VDD Maximum |
| Duty Cycle |
Measured at 50% of waveform
50 ±5(%)
|
| Rise Time/Fall Time |
Click to Open Rise/Fall Time Table
|
| Load Drive Capability |
15pF Maximum |
| Output Logic Type |
CMOS |
| Storage Temperature Range |
-55°C to +125°C |
| Pin 1 Connection |
Tri-State (High Impedance) |
| Tri-State Input Voltage (VIH and VIL) |
80% of VDD Minimum or No Connect to Enable Output, 20% of VDD Maximum to Disable Output (High Impedance) |
| RMS Phase Jitter |
Fj = 12kHz to 20MHz
1pSec Maximum |
| Start Up Time |
10mSec Maximum |
| Standby Current |
Disabled Output: High Impedance
10µA Maximum |