EB16E2 Series Oscillator

Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.8Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)

Datasheet Navigation

Electrical Specifications Dimensions and Marking Environmental / Mechanical Tape & Reel Test Circuit Solder Pad Layout Solder Reflow Show All

Resources

Series FAQs Qualification Report Thermal Resistance FAQs REACH Resources RoHS Resources

Revision G 10/29/2010

Electrical Specifications

Nominal Frequency	1.8463MHz to 100.000MHz Some frequencies within this range may not be available.
Frequency Tolerance/Stability	(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock and Vibration) ±100ppm Maximum ±50ppm Maximum ±25ppm Maximum
Operating Temperature Range	-20°C to +70°C -40°C to +85°C
Supply Voltage (V_DD)	1.8V_DC ±5%
Input Current	3mA Maximum from 1.8463MHz to 9.999999MHz 4mA Maximum from 10.000MHz to 39.999999MHz 5mA Maximum from 40.000MHz to 50.000MHz 6mA Maximum from 50.000001MHz to 54.000MHz 10mA Maximum from 54.000001MHz to 100.000MHz
Output Voltage Logic High (V_OH)	90% of V_DD Minimum (I_OH= -4mA)
Output Voltage Logic Low (V_OL)	10% of V_DD Maximum (I_OL= +4mA)
Duty Cycle	Measured at 50% of waveform 50 ±5(%)
Rise Time/Fall Time	Measured at 20% to 80% of Waveform 5nSec Maximum over Nominal Frequency 1.8463MHz to 24.000MHz 4nSec Maximum over Nominal Frequency 24.000001MHz to 50.000MHz 3nSec Maximum over Nominal Frequency 50.000001MHz to 100.000MHz
Load Drive Capability	15pF Maximum
Storage Temperature	-55°C to +125°C
Output Control Function	Tri-State Enable High
Tri-State Input Voltage	>80% of V_DD or No Connect to Enable Output. <20% of V_DD to Disable Output (High Impedance).
RMS Phase Jitter	1pSec Maximum (Fj = 12kHz to 20MHz)
Start Up Time	10mSec Maximum
Standby Current	10µA Maximum