EC39 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)
Revision I 03/12/2015
Electrical Specifications
| Nominal Frequency |
1.000MHz to 200.000MHz
Some frequencies within this range may not be available. |
| Frequency Tolerance/Stability |
(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
|
| Operating Temperature Range |
-10°C to +70°C
-40°C to +85°C
|
| Supply Voltage |
1.8VDC ±5% |
| Input Current |
3mA Maximum from 1.000MHz to 9.999999MHz
4mA Maximum from 10.000MHz to 34.999999MHz
8mA Maximum from 35.000MHz to 49.999999MHz
9mA Maximum from 50.000MHz to 69.999999MHz
11mA Maximum from 70.000MHz to 89.999999MHz
12mA Maximum from 90.000MHz to 200.000MHz
|
| Output Voltage Logic High (VOH) |
IOH= -4mA
90% of VDD Minimum |
| Output Voltage Logic Low (VOL) |
IOL= +4mA
10% of VDD Maximum |
| Duty Cycle |
Measured at 50% of Waveform
50 ±10(%)
50 ±5(%)
|
| Rise Time/Fall Time |
Measured at 20% to 80% of Waveform
6nSec Maximum from 1.000MHz to 39.999MHz
4nSec Maximum from 40.000MHz to 79.999MHz
3nSec Maximum from 80.000MHz to 200.000MHz |
| Load Drive Capability |
15pF Maximum |
| Output Logic Type |
CMOS |
| Pin 1 Connection |
Tri-State (High Impedance) |
| Tri-State Input Voltage |
90% of VDD Minimum or No Connect to Enable Output
10% of VDD Maximum to Disable Output(High Impedance) |
| Standby Current |
Disabled Output: High Impedance
10µA Maximum |
| RMS Phase Jitter |
12kHz to 20MHz offset frequency
1pSec Maximum |
| Start Up Time |
10mSec Maximum |
| Storage Temperature |
-55°C to +125°C |