| |
 |
EL15C7 Series Oscillator |
Stock Search
Quote/Sample
|
- Crystal Clock Oscillators
- LVDS Output
- +2.5V Supply Voltage
- Complementary Output
- Tri-State Output Function
- 6 Pad Ceramic SMD Package
- Low Stand-by Current
- RoHS Compliant (Pb-Free)
|
 |
 |
|
|
 |
Nominal Frequency |
80.000MHz, 80.157MHz, 85.000MHz, 87.125MHz,
90.000MHz, 100.000MHz, 106.250MHz, 110.000MHz, 119.000MHz, 120.000MHz, 122.888MHz,
124.400MHz, 125.000MHz, 127.000MHz, 128.000MHz, 131.072MHz, 133.000MHz, 133.330MHz, 133.333MHz,
135.000MHz, 137.472MHz, 150.000MHz, 155.520MHz, 156.250MHz, 159.375MHz, 161.1328MHz, 162.500MHz,
163.840MHz, 164.355MHz, 164.355469MHz, 166.000MHz, 166.670MHz, 167.3316MHz, 170.000MHz, 173.3705MHz,
175.000MHz, 176.83816MHz, 187.500MHz, 187.509375MHz, 187.5103MHz, 200.000MHz, 212.500MHz, 240.000MHz, 250.000MHz or 312.500MHz
|
|
The specified reference or "center" frequency of the oscillator.
Typically specified in megahertz (MHz)or kilohertz (kHz).
|
|
| Frequency Tolerance/Stability |
Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the
Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C,
Shock, and Vibration
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum (Only available over Nominal Frequency range of 80.000MHz to 212.500MHz)
±20ppm Maximum (Only available at 0°C to +70°C over Nominal Frequency range of 80.000MHz to 212.500MHz) |
|
Operating Temperature Range |
0°C to +70°C
-40°C to +85°C |
|
The maximum and minimum temperatures that
the oscillator device can be exposed to during oscillation. Over this
temperature range, all of the specified device operating
parameters are guaranteed.
|
|
Supply Voltage (VCC) |
2.5VDC ±5% |
|
The DC input voltage necessary for oscillator operation, specified in
volts.
|
|
Input Current |
50mA Maximum over Nominal Frequency of 80.000MHz to 249.999999MHz
65mA Maximum over Nominal Frequency of 250.000MHz to 312.500MHz |
|
The amount of current consumption by an oscillator from the power
supply, typically specified in milliamps (mA).
|
|
Output Voltage Logic High (VOH) |
1.43VDC Typical, 1.6VDC Maximum |
|
Defined as the Output Voltage Logic High or "Logic 1"
(Figure 1 in oscillator
glossary of terms).
|
|
Output Voltage Logic Low (VOL) |
1.1VDC Typical, 0.9VDC Minimum |
|
| Differential Output Voltage (VOD) |
247mVDC Minimum, 330mVDC Typical, 454mVDC Maximum |
|
| Differential Output Error (DVOD) |
50mVDC Maximum |
|
| Offset Voltage (VOS) |
1.125VDC Minimum, 1.250VDC Typical, 1.375VDC Maximum |
|
| Offset Error (DVOS) |
150mVDC Maximum |
|
| Output Swing (DVOPP) |
250mVDC Minimum |
|
Duty Cycle |
Measured at 50% of waveform
50 ±5(%) |
|
The measure of output waveform uniformity. This term, also referred
to as symmetry, is a measurement of the time that the output
waveform is in a logic high state, expressed as a percentage (%).
This parameter is measured at a specified voltage threshold or at a
percentage of the output waveform amplitude (Figure 1 in the oscillator glossary of terms).
|
|
Rise Time/Fall Time |
Measured over 20% to 80% of waveform
300pSec Typical, 700pSec Maximum |
|
The Rise Time, measured in nanoseconds (nSec), is defined as the
transition time from an output logic low to an output logic high.
Conversely, the Fall Time, also measured in nanoseconds (nSec), is
defined as the transition time from an output logic high to an output
logic low. This transition time is measured at specified voltage
thresholds or at specified percentages of the output waveform
amplitude
(Figure 1 in the oscillator glossary of terms).
|
|
| Load Drive Capability |
100 Ohms Between Output and Complementary Output |
|
Storage Temperature |
-55°C to +125°C |
|
The minimum and maximum temperatures that the device can
be stored or exposed to when in a non-oscillation state. After exposing or
storing the device at the minimum or maximum temperatures for a length of
time, all of the operating specifications are guaranteed over the specified
Operating Temperature Range.
|
|
| Logic Control / Additional Output |
Tri-State (High Impedance) and Complementary Output
|
|
| Tri-State Input Voltage |
VIH of 70% of VCC Minimum or No
Connect to Enable Output and Complimentary Output, VIL
of 30% of VCC Maximum to Disable Output (High Impedance) and Complementary Output.
|
|
| Start-Up Time |
10mSec Maximum |
|
| RMS Phase Jitter |
FJ=12kHz to 20MHz
0.4pSec Typical, 1pSec Maximum
|
|
| Standby Current (Without Load) |
30µA Maximum |
|
| Phase Noise |
FO = 156.250MHz
-60dBc/Hz at 10Hz Offset
-95dBc/Hz at 100Hz Offset
-125dBc/Hz at 1kHz Offset
-143dBc/Hz at 10kHz Offset
-145dBc/Hz at 100kHz Offset
-145dBc/Hz at 1MHz Offset
-146dBc/Hz at 10MHz Offset
|
|
|
|
 |
|
| Top of Page |
|
|
|
|
|
Pad 1: Tri-State
Pad 2: No Connect
Pad 3: Case Ground |
Pad 4: Output
Pad 5: Complementary Output
Pad 6: Supply voltage
|
|
|
|
|
| Top of Page |
|
|
|
| Please note that this form is intended to provide a listing
of standard options. If you require an option or configuration
that is not present here, you may want to fill out our
Custom Oscillator Part Number Request Form. If you have any trouble with
this form, or just have a suggestion as to how it might be improved, please
contact our Global Customer Support Team. |
|
|
|
|
|
| Top of Page |
|
|
|
|
|
|
| Top of Page |
|
|
|
|
|
|
| Top of Page |
|
|
|
|
| ESD Susceptibility: |
MIL-STD-883, Method 3015, Class 1, HBM: 1500V |
|
| Fine Leak Test: |
MIL-STD-883, Method 1014, Condition A |
|
| Flammability: |
UL94-V0 |
|
| Gross Leak Test: |
MIL-STD-883, Method 1014, Condition C |
|
| Mechanical Shock: |
MIL-STD-883, Method 2002, Condition B |
|
| Moisture Resistance: |
MIL-STD-883, Method 1004 |
|
| Moisture Sensitivity: |
J-STD-20, MSL 1 |
|
| Resistance to Soldering Heat: |
MIL-STD-202, Method 210, Condition K |
|
| Resistance to Solvents: |
MIL-STD-202, Method 215 |
|
| Solderability: |
MIL-STD-883, Method 2003 |
|
| Temperature Cycling: |
MIL-STD-883, Method 1010, Condition B |
|
| Vibration: |
MIL-STD-883, Method 2007, Condition A |
|
|
|
|
|
| Top of Page |
|
|
|
|
|
|
| Top of Page |
|
Mechanical Dimensions
Part Number Constructor / Request a Quote or Sample
Marking Specifications
Environmental & Mechanical Specifications
Other Resources