 |
Nominal Frequency |
10.000MHz, 12.288MHz, 12.800MHz, 13.000MHz, 16.000MHz, or 19.440MHz
|
|
The specified reference or "center" frequency of the oscillator.
Typically specified in megahertz (MHz)or kilohertz (kHz).
|
|
| Frequency Stability |
Inclusive of Operating Temperature Range
±0.28ppm Maximum (Measured at VDD=3.3VDC and VC=1.5Vdc
|
|
| Total Holdover Stability |
Inclusive of Frequency Stability and 24 Hours Aging
±0.37ppm Maximum |
|
| Total Frequency Tolerance |
Inclusive of Frequency Tolerance, Frequency Stability, VDD(±1%), Load(±5%), solder reflow, and 20 year aging
±4.6ppm Maximum
|
|
Operating Temperature Range |
-10°C to 60°C
-20°C to 70°C
|
|
The maximum and minimum temperatures that
the oscillator device can be exposed to during oscillation. Over this
temperature range, all of the specified device operating
parameters are guaranteed.
|
|
Supply Voltage (VDD) |
3.3VDC ±5% |
|
The DC input voltage necessary for oscillator operation, specified in
volts.
|
|
Input Current |
1.5mA Maximum (10.000MHz to 14.999MHz)
2.0mA Maximum (15.000MHz to 19.440MHz)
|
|
The amount of current consumption by an oscillator from the power
supply, typically specified in milliamps (mA).
|
|
| Output Voltage |
.8Vp-p Clipped Sinewave Minimum, External DC-Cut capacitor required, 150pF recommended |
|
Load Drive Capability |
10kOhms // 10pF |
|
The maximum load the oscillator can drive specified in terms of the
number of gates or the type of load circuit (Figures 2, 3 and 4 in oscillator glossary of terms).
|
|
| External Trim(Voltage Control Option) |
1.5VDC±1.0VDC, Positive Transfer Characteristic ±5ppm Minimum |
|
Defined as the Output Voltage Logic Low or "Logic 0"
(Figure 1 in oscillator
glossary of terms).
|
|
| Control Voltage Range |
0.0VDCto VDD |
|
| Linearity |
5% Maximum |
|
| Input Impedance |
100kOhms Minimum |
|
| Typical Phase Noise |
Measured at 12.800MHz
-80dBc/Hz Typical at 10Hz Offset
-115dBc/Hz Typical at 100Hz Offset
-135dBc/Hz Typical at 1kHz Offset
-145dBc/Hz Typical at 10kHz Offset
|
|
| RMS Phase Jitter |
FJ = 12kHz to 20MHz
1pSec Maximum |
|
| Start Up Time |
5mSec Maximum |
|
Storage Temperature |
-40°C to +125°C |
|
The minimum and maximum temperatures that the device can
be stored or exposed to when in a non-oscillation state. After exposing or
storing the device at the minimum or maximum temperatures for a length of
time, all of the operating specifications are guaranteed over the specified
Operating Temperature Range.
|
|
Check Stock
Mechanical Dimensions
Part Number Constructor / Request a Quote or Sample
Marking Specifications
Environmental & Mechanical Specifications
Other Resources