Log On  |  714-433-1200  |  Email Customer Support

Ecliptek is one of the ILSI America brands, which also include:

ILSI America MMD Oscilent

EQRC13 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVPECL (PECL) 3.3Vdc 6 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)

Revision  A  11/29/2012

Electrical Specifications

Nominal Frequency 19.440MHz to 400.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Operating Temperature Range 0°C to +70°C
-20°C to +70°C
-40°C to +85°C
Supply Voltage (VDD) 3.3VDC ±5%
Input Current With Load
85mA Maximum
Output Voltage Logic High (VOH) VDD-1.025VDC Minimum, 2.35VDC Typical, VDD-0.88VDC Maximum
Output Voltage Logic Low (VOL) VDD-1.81VDC Minimum, 1.6VDC Typical, VDD-1.62VDC Maximum
Duty Cycle Measured at 50% of waveform
50 ±5(%)
Rise Time/Fall Time Measured at 20% to 80% of Waveform
200pSec Typical, 300pSec Maximum
Load Drive Capability 50 Ohms into VDD-2.0VDC
Output Logic Type LVPECL
Phase Noise All Values are Typical
-70dBc/Hz at 10Hz offset, -98dBc/Hz at 100Hz offset, -121dBc/Hz at 1kHz offset, -124dBc/Hz at 10kHz offset, -126dBc/Hz at 100kHz offset, -140dBc/Hz at 1MHz offset; -146dBc/Hz at 10MHz offset; -147dBc/Hz at 20MHz offset
Logic Control / Additional Output Output Enable (OE) and Complementary Output
Standby (ST) and Complementary Output
Tri-State Input Voltage (Vih and Vil) 70% of VDD Minimum or No Connect to Enable Output and Complementary Output, 30% of VDD Maximum to Disable Output and Complementary Output (High Impedance)
Output Enable Current Without Load
75mA Maximum
Standby Current Without Load
10µA Maximum
RMS Phase Jitter Fj = 12kHz to 20MHz; Random
0.6pSec Typical, 1pSec Maximum
Period Jitter (Deterministic) 15pSec Typical
Period Jitter (Random) 1pSec Typical
Period Jitter (RMS) 1.5pSec Typical
Period Jitter (pk-pk) 25pSec Typical
Storage Temperature Range -55°C to +125°C
Start Up Time 10mSec Maximum