Log On  |  714-433-1200  |  Email Customer Support

Ecliptek is one of the ILSI America brands, which also include:

ILSI America MMD Oscilent

EQTJ33 Series Oscillator
Temperature Compensated Quartz Crystal Clock Oscillators TCXO LVDS (DS) 3.3Vdc 6 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)

Revision  A  09/09/2015

Electrical Specifications

Nominal Frequency 10.000MHz to 625.000MHz
Some frequencies within this range may not be available.
Frequency Stability Inclusive of Operating Temperature Range, at VDD=3.3VDC
±5.0ppm Maximum
±3.0ppm Maximum
±2.5ppm Maximum
±2.0ppm Maximum
±1.5ppm Maximum
±1.0ppm Maximum
Frequency Stability vs. Frequency Tolerance At 25°C ±2°C, at VDD=3.3VDC, Pre-Reflow
±2.0ppm Maximum
±1.5ppm Maximum
±1.0ppm Maximum
Frequency Stability vs. Input Voltage ±0.2ppm Maximum (±5%)
Frequency Stability vs. Load ±0.2ppm Maximum (±2pF)
Frequency Stability vs. Reflow ±1.0ppm Maximum (at 25°C, 24 hours after reflow, 1 time)
Frequency Stability vs. Aging ±1ppm/Year Maximum (at 25°C)
Operating Temperature Range 0°C to +50°C
-10°C to +60°C
0°C to +70°C
-20°C to +70°C
-30°C to +60°C
-30°C to +75°C
-30°C to +85°C
-40°C to +85°C
Supply Voltage 3.3VDC ±5%
Input Current Unloaded
30mA Maximum
Output Voltage Logic High (Voh) 1.425VDC Typical
Output Voltage Logic Low (Vol) 1.075VDC Typical
Differential Output Error (dVod) 50mVDC Maximum
Differential Output Voltage (Vod) 200mVDC Minimum, 350mVDC Typical, 454mVDC Maximum
Offset Voltage (Vos) 1.125VDC Minimum, 1.250VDC Typical, 1.375VDC Maximum
Rise/Fall Time Measured at 10% to 90% of Waveform
500pSec Maximum
Duty Cycle Measured at 50% of Waveform
50 ±5(%)
Offset Error (dVos) 50mVDC Maximum
Load Drive Capability 100 Ohms Between Output and Complementary Output
Output Logic Type LVDS
Phase Noise Click to Open Phase Noise Table
Output Control Function Output Enable (OE)
Output Control Input Voltage Logic High (Vih) 90% of VDD Minimum or No Connect to Enable Output and Complementary Output
Output Control Input Voltage Logic Low (Vil) 10% of VDD Maximum to Disable Output and Complementary Output (High Impedance)
Output Enable Time 100nSec Maximum
Output Disable Time 50nSec Maximum
Output Enable Current Without Load (Pin 2 = Ground)
18mA Maximum
RMS Phase Jitter Click to Open RMS Phase Jitter Table
Period Jitter (Deterministic) 0.2pSec Typical
Period Jitter (Random) 2pSec Typical
Period Jitter (RMS) 3pSec Maximum
Period Jitter (pk-pk) 30pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55°C to +125°C